WARNING: This product is certified manufactured and tested in compliance with strict safety and radio frequency interference regulations. Any unauthorized alteration which includes the addition of new functions or the connection of external devices may impact this certification.
These limits are designed to provide reasonable protection against harmful interference when the product is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Shielded cables must be used with this equipment to maintain compliance with FCC regulations. WARNING: Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
With specific regard to lasers, the equipment complies with laser product performance standards set by governmental, national and international agencies as a Class 1 Laser Product. It does not emit hazardous radiation as the beam is totally enclosed during all phases of customer operation and maintenance. This Regulation places a duty on all employers and self-employed persons to ensure the electrical system in their premises is constructed, maintained and operated in such a manner as to prevent, so far as reasonably practical, danger.
This includes ensuring all electrical equipment connected to such electrical systems safely constructed, maintained and operated. All Xerox equipment has been designed to exacting safety standards and has undergone a variety of stringent safety tests including earth bond, insulation resistance and electrical strength tests.
Xerox Limited manufacturing plants have been awarded ISO quality certification and are subject to regular audits by the British Standards Institution or equivalent national standards body. Xerox equipment which has been properly and regularly serviced and maintained should not have to undergo additional specific safety tests pursuant to the Regulation.
Customers wishing to complete safety testing should contact Xerox Limited see page for details for advice prior to any test implementation. XEROX equipment should, however, be properly and regularly serviced and maintained at all times. This Regulation places a duty on all employers and selfemployed persons to ensure the electrical systems in their premises are constructed, maintained and operated in such a manner as to prevent, so far as reasonably practicable, danger.
This includes ensuring that all electrical products connected to such electrical systems are safely constructed, maintained and operated. The regulation places a duty on all employers and self-employed persons.
The regulation does not impose on, amongst others, manufacturers or suppliers of such electrical systems. However, like all electrical equipment, they have to be regularly serviced and maintained by competent persons.
They will be pleased to assist you. In the event of any defect being noted, the XEROX equipment will be switched off and disconnected from the supply until the defect has been corrected. You will be advised of such action to enable such defects to be corrected.
Please contact us if you have any queries regarding the information provided in this document. In the event of problems, you should contact your local Xerox representative in the first instance. This product has been tested to and is compliant with TBR21, a technical specification for terminal equipment for use on analogue-switched telephone networks in the European Economic Area.
The product may be configured to be compatible with other country networks. Please contact your Xerox representative if it needs to be reconnected to another country's network. There are no user-adjustable settings in the product. DTMF signaling provides reliable and faster call setup. Modification, connection to external control software or to external control apparatus not authorized by Xerox, will invalidate its certification. The Telephone Consumer Protection Act of makes it unlawful for any person to use a computer or other electronic device, including FAX machines, to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other entity, or other individual sending the message and the telephone number of the sending machine or such business, other entity, or individual.
The telephone number provided may not be a number or any other number for which charges exceed local or long-distance transmission charges. If requested, this number must be provided to the Telephone Company. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA.
A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant.
Connecting this machine to an unauthorized jack can damage Telephone Company equipment. You may safely connect the machine to the following standard modular jack: USOC RJC using the compliant telephone line cord with modular plugs provided with the installation kit.
See installation instructions for details. The Ringer Equivalence Number or REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five 5. To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local Telephone Company.
The digits represented by are the REN without a decimal point e. For earlier products, the REN is separately shown on the label. If this Xerox equipment causes harm to the telephone network, the Telephone Company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn't practical, the Telephone Company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.
The Telephone Company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the Telephone Company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.
If trouble is experienced with this Xerox equipment, for repair or warranty information, please contact the appropriate service center; details of which are displayed either on the machine or contained within the user guide. If the equipment is causing harm to the telephone network, the Telephone Company may request that you disconnect the equipment until the problem is resolved. Repairs to the machine should be made only by a Xerox representative or an authorized Xerox service agency.
This applies at any time during or after the service warranty period. If unauthorized repair is performed, the remainder of the warranty period is null and void. This equipment must not be used on party lines. Connection to party line service is subject to state tariffs.
Contact the state public utility commission, public service commission or corporation commission for information. If your office has specially wired alarm equipment connected to the telephone line, ensure the installation of this Xerox equipment does not disable your alarm equipment.
If you have questions about what will disable alarm equipment, consult your Telephone Company or a qualified installer. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices does not exceed five.
Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment. Users should ensure for their own protection the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together.
This precaution may be particularly important in rural areas. CAUTION: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority or electrician, as appropriate. Getting Started. Use the following instructions to make the necessary connections required to install the. Connect the Automatic Document Feeder Cable to the port shown and fasten the side screws.
Ensure the scanner is unlocked before connecting the power cord. Connect the AC Power Cord to the machine and a power outlet. Purchased replacement toner cartridges will yield approximately two times the number of copies. To load another size, lift the rear guide out of the current position and into the required position. Using the or navigation keys select the language required. Changing the country option will clear the memory. In some countries it is required by law to indicate the fax number on any fax sent.
The System ID containing the telephone number and a name or company name , will be printed at the top of each page sent from the machine.
In some countries access to the local ID by the user is not permitted due to local regulations. If a number has already been entered it is displayed.
If a name has already been entered it is displayed. To correct a mistake, move the cursor under the wrong character by pressing or. Press the correct number to overwrite the incorrect character. The current time and date are shown on the display when the machine is on and ready for.
The time and date are printed on all faxes sent. Follow the instructions below to set the. If an invalid number is entered the machine beeps and does not proceed to the next step. Reenter the correct number to proceed. Enter the correct date and time using the Numeric Keypad :. Installing the drivers and other software will enable PC printing.
Type the name of a program, folder, or document, and Windows will open it for you. Product Overview. This reduces the risk of jams and damage to originals.
A job can be added to the job queue by scanning it, even while the WorkCentre is printing another job. Compare the output to that from other copiers and see the difference. This product complies with a variety of international standards for environmental protection and is compatible with most recycled paper. Print drivers are provided and enable the following functions:. The WorkCentre M15i is equipped with a True Color quality scanner capable of reproducing color charts, photographs, graphics and printed text.
Documents scanned can be placed on a PC and the images manipulated using an appropriate software package e.
The WorkCentre M15i allows documents to be faxed via a telephone line. Functions such as speed dialing, delayed send and polling are available. There are also a number of fax reports available which provide users with information about items such as scheduled jobs, stored fax numbers and transmissions.
This configuration has copying and printing capabilities. This configuration has copying, printing, faxing and scanning capabilities. Cassette and Bypass in Copy or Fax mode. Use to dial calls and send fax documents by entering a Speed Dial number which. Clear All. Use the Copy mode to make copies and select the Copy features.
When the machine is in Copy mode the standby screen displays:. The Fax mode is available on the WorkCentre M15i only. Use the Fax mode to send faxes and use the Fax features and functions. This upgrade is only for use on the Pocket Pro S. Use of this upgrade on the Pocket Pro will cause damage to the device. Please make sure to only use on the Pocket Pro S. This upgrade must only be used on the Pocket Pro S. Please check the label on the Pocket Pro to make sure that it is a S.
Be careful with the other firmware. The machine firmware has two different versions: One for M15 1. Product support WorkCentre M15i. Apply Filters. More details To install, extract the file to a local folder and double click.
I agree to the Terms and Conditions Download. Scan Driver. PCL6 Driver. Version 1. For use with Windows or Windows Server For use with Windows WorkCentre M15i ControlCentre. Firmware Upgrade for the Pocket Pro S only. WorkCentre M15i 1. Need more support? Get answers in the Community Support Forum Join the conversation. Join the conversation. More Resources. Windows 11 Support Center. Warranty status: Unspecified - Check warranty status Manufacturer warranty has expired - See details Covered under Manufacturer warranty Covered under Extended warranty , months remaining month remaining days remaining day remaining - See details.
Serial number:. Product number:. Warranty end date:. Warranty removed from product: This product was designated to be returned to HP. Thus, the warranty has been removed from this product. Product sold by third party: This product was sold by a third party.
Any warranty support needed would be completed by the third party that sold the product. Product has been exchanged: This product has been exchanged for a new or refurbished product. Please use the product number and serial numbers of the new product to validate warranty status. Product sold without warranty: This product was sold by a reseller. Any warranty support needed would be completed by the reseller that sold the product.
The serial number provided does not match the previously selected product. It matches the product:. Please return to the product information page and verify the numbers provided or try again later. Errors can be displayed in many formats. Please include all extra characters, such as hyphens or colons or periods as they appear within the number. Possible error formats where 'x' could represent a letter or number : xx.
One or more of the values entered is not permitted. Please wait while we process your request. This process can take several minutes depending on the number of warranties being checked. Select registration option.
Error: Javascript is disabled in this browser.
0コメント